产品列表PRODUCTS LIST

首页 > 技术与支持 > 爱泽工业2018年5月部分到货产品专题及库存 MINARIK电机调速箱
爱泽工业2018年5月部分到货产品专题及库存 MINARIK电机调速箱
点击次数:1170 更新时间:2018-05-17

 

 

 

如下为我司爱泽工业IZE_Industries本月部分到货MINARIK电机调速箱相关产品,索取样本资料和产品信息。

 

MINARIK电机调速箱MM23401C爱泽工业izeindustries

 

美国MINARIK电机调速箱 MM23401C产品描述

Minarik Drives的MM23401C标准驱动安装在NEMA 4X机柜中,应用于免冲洗,腐蚀性材料,与封闭设备或不需要的外部固体物体的接触。MM23401C为1/8至2 HP的直流电刷式电机提供了良好的性能。这种独立的驱动器包含电源指示灯,预先安装的散热器,电源开关和可从机箱正面看的速度调节旋钮。

 

使用全波整流的交流线路输入,该SCR驱动器提供60:1的速度范围。用户在机柜内部的螺丝端子排上安装所有的接线端子。双电压功能允许这些驱动器在115或230 VAC,50/60 Hz下运行90或180伏的电机。

 

Minarik Drives' standard MM23401C drive is housed in a NEMA 4X enclosure guaranteeing protection from washdown applications, corrosive material, wind-blown dust, incidental contact with enclosed equipment or unwanted external solid objects. The MM23401C provides sound performance for DC brush-type motors from 1/8 to 2 HP. This stand-alone cased drive contains a neon power light, pre-mounted heat sink, power switch, and speed adjustment knob accessible from the front of the enclosure.

 

Using full-wave rectification of the AC line input, this SCR drive provides a 60:1 speed range. Users make all wire terminations at the screw terminal block inside the enclosure. The dual voltage capability allows these drives to operate from 115 or 230 VAC, 50/60 Hz, to run 90 or 180 VDC motors.

 

美国MINARIK电机调速箱 MM23401C技术数据

 

 

美国MINARIK电机调速箱 MM23401C产品特点:

MM尺寸:机箱驱动器具有紧凑的行业标准尺寸

速度范围及调节:在60:1速比内调节1%

用户可调校准值:红外补偿,zui小速度,zui大速度,电流限制,加速和减速

LED诊断:LED用于所有型号的电流限制状态,套管带有绿色的电源灯

停止模式:禁止(N/O)在所有型号上惯性制动,MM232x1C包含动态制动功能

接线端子:底座上易于使用的铲形端子; 螺栓拧紧于封闭式设备终端。

选项:机箱驱动器上的“-Q”选项包括快速断开端子块和电源LED。

配件: 223-0159或223-0174,201-0024配18”引线的插头,DLC600数字闭环控制器,PCM4隔离卡。

MM footprint: Chassis drives have a compact industry standard footprint.

Speed range and regulation: 1% regulation over 60:1 speed range.

User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.

Diagnostic LED: LED for current limit status on all models. Cased models

have a green power light.

Stopping Modes: Inhibit (N/O) for coasting to a stop on all models. Dynamic braking included on MM232x1C.

Spade and screw terminals: Easy to use spade terminals on chassis; screw

terminals on enclosed units.

Options: “-Q” option on chassis drives include quick disconnect terminal blockand power LED.

Accessories: Heats ink 223-0159 or 223-0174. 201-0024 inhibit plug with18” leads, DLC600 digital closed loop controller, PCM4 isolation card.

 

爱泽工业(IZE INDUSTRIES)*经销、常用备件型号

MINARIK电机调速箱MM23401C

MINARIK电机调速箱MM23001C

MINARIK电机调速箱MM23001C-Q 

MINARIK电机调速箱MM23011C 

MINARIK电机调速箱MM23011C-Q 

MINARIK电机调速箱MM23101C 

MINARIK电机调速箱MM23111C 

MINARIK电机调速箱MM23201C 

MINARIK电机调速箱MM23211C 

MINARIK电机调速箱MM23401C  

MINARIK电机调速箱MM23411C

 

我司MINARIK电机调速箱到货图集

   

MINARIK电机调速箱MM23401C爱泽工业izeindustries

 

以上为本月部分到货MINARIK电机调速箱相关产品,爱泽工业专业提供MINARIK全系列产品,MINARIK电机调速箱 MM23401C、MM23411C、MM23201C、MM23001C等等。

 

如果您有任何关于产品的相关技术咨询或者需要产品的相关技术资料与文档,请随时爱泽工业。我们将尽全力解决您的问题。