产品列表PRODUCTS LIST

首页>产品中心>化工工具>压头>QGPR104ABB压头QGPR104 YM114002-AA样本

ABB压头QGPR104 YM114002-AA样本

简要描述:

ABB压头QGPR104 YM114002-AA样本
Pressductor®技术是基于负载单元核心材料的磁弹性特性的变化。材料的磁性的负载相关变化以这种方式用于在负载单元核心中的次级测量绕组上感应电压。
压头的核心由许多圈组成。这些圈是由缠绕在内圈上的磁弹性板制成的。一个单独的测量区域由一个转盘上的四个孔组成,带有相关的励磁和测量信号线圈。

更新时间:2023-08-10

访问次数:867

在线留言
ABB压头QGPR104 YM114002-AA样本

 

 

ABB是一个开创性的技术*,四十多年来,ABB一直站在zui前沿,致力于创新数字化连接和启用的工业设备和系统。每设法天都在提高公用事业,工业,运输和基础设施的效率,安全性和生产力。ABB拥有130多年的历史,在100多个国家和地区开展业务,员工约13.2万人。

 

瑞士ABB压头QGPR104 QGPR102的应用范围

包括压头在内的标准电气设备构成了从0.1至1.6 MN的额定力的力测量系统。

QGPR102/104压头构成设备的力传感单元。形状为环形,适合安装在要测量轴向力的轴上,例如安装在轧机螺杆螺母和轧机机架之间的轧机上。在这种情况下,使用两个压头,每一个在辊的一端。由于它们的位置,压头感知作用在磨机机架上的主要力量。

QGPR 102/104压头的典型应用领域是在管道和管道磨机中,特别适用于(金属)管道挤压和管道矫直机器的安装。 QGPR 102/104压头也可以用于平面轧机,其轧制力的大小小于可用其他zui小可用的ABB辊力测力传感器测量的力的大小(即当轧制热轧或冷轧更小的尺寸)。

由于QGPR104压头的安装高度较小,因此特别适用于压头测量方向的可用空间太小而无法使用QGPR 102称重传感器的场合。

The standard electrical equipment, including the load cells, constitutes a force measuring system for nominal forces from 0.1 up to 1.6 MN.

QGPR 102/104 load cells constitute the force sensing units of the equipment. These are annular in shape and are therefore suitable for installation on shafts where the axial forces are to be measured, e.g., in rolling mills where they are installed between the mill screw nuts and the mill stand. In this case, two load cells are used, one at each end of the rolls. Due to their location, the load cells sense the main forces acting on the mill stand. See figure Load cell location in a mill stand.

Typical application area of QGPR 102/104 load cells are in pipe and tube mills particularly for installation in (metallic) pipe extrusion and pipe straightening machines. QGPR 102/104 load cells can also be used in flat rolling mills where the magnitude of the roll forces is smaller than the force magnitudes that can be measured with other smallest available ABB Roll Force load cell types (i.e. when rolling hot or cold strips of smaller dimensions).

Due to the smaller installation height of QGPR 104 load cells, they are particularly suitable for installations where the available space in the measuring direction of the load cell is too small for using QGPR 102 load cells.

 

瑞士ABB压头QGPR104 YM114002-AA测量原理

Pressductor®技术是基于负载单元核心材料的磁弹性特性的变化。材料的磁性的负载相关变化以这种方式用于在负载单元核心中的次级测量绕组上感应电压。

压头的核心由许多圈组成。这些圈是由缠绕在内圈上的磁弹性板制成的。一个单独的测量区域由一个转盘上的四个孔组成,带有相关的励磁和测量信号线圈。

初级励磁绕组提供有特殊的交流电,在相邻的钢中产生磁通量。只要没有负载施加到换能器元件上,在标准激励的次级信号绕组周围就不会产生净磁通量。当传感器暴露在测量方向上的力时,钢中的磁弹性变化将允许磁通量并入次级绕组,从而引起与施加的力成比例的交流电压。

Pressductor® technology is based on the change of the magneto-elastic properties in the material which the load cell core is made of. The load-dependent change of the magnetic properties of the material is in this way used for inducing a voltage over a secondary measurement winding in the load cell core.

The core of a load cell consists of a large number of turns. The turns are made of magneto-elastic plate winded around an inner ring. One single measuring zone will consist of the four holes in one turn plate with associated excitation and measurement signal windings.

The primary excitation winding is supplied with a special alternating current, creating a magnetic flux in the adjacent steel. As long as no load is applied to the transducer element, no net magnetic flux will occur around the secondary, signal, winding at the standard excitation. When the transducer is exposed to a force in the measurement direction, the magneto-elastic change in the steel will allow the magnetic flux to incorporate the secondary winding, inducing an AC voltage proportional to the applied force.

 

瑞士ABB压头QGPR104 YM114002-AA技术参数


 

瑞士ABB压头QGPR104 YM114002-AA尺寸图

 

爱泽工业(IZE INDUSTRIES)*经销、常用备件型号

ABB压头QGPR104 YM114002-AA

ABB压头QGPR102

爱泽工业集产品开发、设计、制造、销售、服务于一体,代理经营*的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的*渠道。

 

爱泽工业为用户提供咨询、资料上门、辅助选型,售后安装服务,操作人员免费培训等服务。

索取样本资料和产品信息。 

 

如果有任何关于瑞士ABB压头QGPR104 YM114002-AA的疑问,请随时与我们,爱泽工业(86-)。我们将尽全力解决您的问题。

有关瑞士ABB压头产品更详细的信息或者购买瑞士ABB相关产品,请爱泽工业。

 

If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries。。com.

 

 

 

瑞士ABB压头QGPR104 YM114002-AA电气参数及外观尺寸

 

 如果你对QGPR104ABB压头QGPR104 YM114002-AA样本感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7