APPLIED MOTION电机TSM23Q-4AG

APPLIED MOTION成立于 1978 年，专注于高精度、高性价比的运动控制产品。提供完整的步进和伺服、电机、电机、控制器、减速机和电源，以服务于多样化的工业和 OEM 客户群。

APPLIED MOTION电机TSM23Q-4AG技术参数

APPLIED MOTION电机TSM23Q-4AG产品介绍

TSM23Q-4AG 集成型 StepSERVO 是一款驱动器 + 电机单元，将 NEMA 23 步进电机与伺服驱动器集成在一个设备中。驱动器位于电机后部，需由外部直流电源供电。请参阅下方相关及推荐产品，了解兼容的24V和48V DC 电源。

StepSERVO 技术结合了高扭矩的步进电机与闭环动态控制的伺服系统，提供高度定制的全功能运动控制解决方案，运行安静高效，只需最少电流即可维持指令位置和速度。提高25-50%的扭矩（超过额定保持扭矩），增强加速度能力，从而实现更快的循环时间。集成的 StepSERVO 电机适用于传统步进电机难以达到高精度的系统。

TSM23Q-4AG 可以在多种控制模式下运行，包括：

使用 SCL 或 Modbus/RTU 的流命令（Streaming Command）模式

脉冲与方向（Pulse & Direction）模式

速度（Velocity）模式

还能运行存储在非易失性存储器中的 Q 程序。

Q 程序由 Applied Motion 的 Q Programmer 软件创建，支持运动控制、输入/输出、条件处理、多任务、数学函数等功能。所有 TSM23 设备均通过 Applied Motion 的 Step-Servo 快速调谐软件（Step-Servo Quick Tuner）进行设置、配置和调优，配备内置的 Q Programmer。

每个 TSM23 集成步进电机配备：

8 个数字输入（接受5-24VDC信号，可用于脉冲/方向信号、行程限制、 Jog 开关、 编码器信号、PLC 输出、传感器等）

4 个数字输出（可连接至PLC输入、计数器、指示灯、继电器或其他设备）

1 个模拟输入（接受0-5VDC信号，用于速度和位置控制）

TSM23Q-4AG 配备 RS-232 端口，用于编程和串行通信，支持 Modbus/RTU 和 Applied Motion 的流命令（SCL）。驱动器内部集成一个 5000线（20,000脉冲/转）增量式编码器，用于闭环伺服控制，实现高精度的位置与速度控制。编码器信号可以通过网络访问，也可以在 Q 程序内通过 SCL 寄存器访问

The TSM23Q-4AG integrated StepSERVO is a drive+motor unit, fusing a NEMA 23 step motor and a servo drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. See Related and Recommended Products below for compatible 24 and 48 volt DC power supplies.

StepSERVOtechnology combines the high torque capabilities of a step motor with the closed loop dynamic control of a servo system. The result is a highly customizable all-in-one motion control solution that operates quietly and efficiently, requiring only the minimum amount of current to maintain commanded position and velocity. Boost torque of 25-50% higher than rated holding torque increases the limits of acceleration, leading to faster cycle times. StepSERVOintegrated motors can be applied in systems where a traditional stepper motor would not be capable of achieving the high accuracy required.

The TSM23Q-4AG integrated StepSERVOcan be operated in several different control modes, including Streaming Command mode using either SCL or Modbus/RTU, Pulse & Direction mode, and Velocity mode, plus it has the ability to run a Q program stored in non-volatile memory. Q programs are created using Applied Motion's Q Programmer software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more. All TSM23 units are setup, configured and tuned using Applied Motion's Step-Servo Quick Tuner software with built in Q Programmer

Each TSM23 integrated stepper comes with 8 digital inputs, 4 digital output, and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. The digital outputs can be connected to PLC inputs, counters, lights, relays, or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.

The TSM23Q-4AG comes with an RS-232 port for programming and serial communications to allow for the use either Modbus/RTU or Applied Motion's Streaming Command Language (SCL). An integral 5000-line (20,000 count/rev) incremental encoder is housed inside the same enclosure as the drive electronics and used for closed-loop servo control to attain highly accurate position and velocity control. Encoder counts can be accessed over the network or from within the Q program using SCL registers.

APPLIED MOTION电机其他常用型号：

APPLIED MOTION TSM23Q-4AG

APPLIED MOTION TSM11Q-3RM

APPLIED MOTION TSM11Q-3RM-H01

APPLIED MOTION TSM17P-3AG

APPLIED MOTION TSM17Q-3RG

APPLIED MOTION TSM23Q-4RG

APPLIED MOTION TSM23X3B-R

APPLIED MOTION TSM34IP-3DG

APPLIED MOTION TSM34IP-6DG

APPLIED MOTION TSM34Q-3RG

APPLIED MOTION TSM34Q-6RG

APPLIED MOTION TSM11Q-1RM

APPLIED MOTION TSM17C-1CG

APPLIED MOTION MOTOR NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向制造工业提供制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于APPLIED MOTION电机TSM23Q-4AG的疑问，请随时与我们沟通，我们将尽全力解决您的问题。

If you have any question for APPLIED MOTION products,Please feel free to communicate with us and we will do our best to solve your problem.

APPLIED MOTION电机TSM23Q-4AG技术参数及介绍