如下为我司爱泽工业IZE_Industries本月到货MAZURCZAK相关产品，欢迎致电索取样本资料和产品信息。
MAZURCZAK温度传感器TF02-60BC-F
MAZURCZAK温度传感器TF02-30BC-F
MAZURCZAK加热器PHK46-700100-3.5380Ds K2-BC9
MAZURCZAK加热器ROTKAPPE B-WKB 650-10004,5-380Ds9
MAZURCZAK温度传感器TF系列介绍
该温度传感器的功能基于其内置的 Pt100 传感元件。温度测量原理是利用 Pt100 元件的电阻值随温度变化的特性：在 0°C 时，该元件的电阻精确为 100 Ω；随着温度升高，元件电阻的变化与温度变化成正比。
配套的电子单元向 Pt100 元件通入微弱的恒定电流，并测量元件两端的电压。随后，利用欧姆定律 (R = U/I) 即可计算出元件电阻，进而确定温度值。
电子单元与 Pt100 元件之间的连接可采用 2 线、3 线或 4 线制。我们提供 4 线制连接方案，因为该方案能够补偿连接导线自身的电阻。
导线电阻可能会导致测量结果出现显著偏差，尤其是在导线较长的情况下。因此，温度传感器与电子单元之间的连接距离不应超过 50 米，且通常应采用 3 线或 4 线制连接。若距离更长，可加装输出标准 4…20 mA 信号的温度变送器。
该类温度传感器配有 PFA 材质的柔性保护管（直径 6 mm），标准长度为 1.6 米（也可提供其他长度）；其耐化学腐蚀性能佳，最高工作温度可达 200°C。它们适用于洁净室环境（材料生理无害），并可安装在空间受限的工厂设备及储罐的测量点上。Pt100 传感元件（有效测量长度为 50 mm）安装在保护管的末端。
The function of the temperature sensor results from the integrated Pt100 sensor element. The temperature is determined from the temperature-dependent change in the electrical resistance of the Pt100 element. At 0°C, the element has a resistance of exactly 100 Ω. As the temperature increases, the resistance of the element changes in direct proportion to the temperature change.
A suitable electronic unit generates a low, constant current through the Pt100 element and measures the resulting voltage across the element. The resistance of the element, and thus its temperature, can then be determined with the aid of Ohm’s Law (R = U/I).
The connection between the electronic unit and the Pt100 element can be made with 2, 3 or 4 wires. We provide 4-wire connections because these permit compensation for the resistance of the connecting wires.
Particularly in the case of long wires, the measurement result can be significantly distorted by the wire resistance. Therefore, the connection of temperature sensors to electronics should not exceed 50 m and should be executed generally with 3 or 4 wires. For longer lengths, it is possible to interpose a temperature transmitter with a standard out put signal of 4…20 mA.
Temperature sensors with a flexible protective tube made of PFA (ø 6 mm) with a standard length of 1.6 m (other lengths possible) are extremely resistant to chemicals and the maximum operating temperature is 200°C. They are also suitable for use in cleanroom applications (physiologically benign) and can be mounted to the measuring point in plants and tanks where space is limited. The Pt100 sensor element, with an active measuring length of 50 mm, is mounted to the end of the protective tube.
MAZURCZAK加热器CALOR系列介绍
CALOR 筒式加热器特别适用于直接加热清洗液和碱性溶液。
该筒式加热器采用陶瓷槽体结构，具有高电气绝缘性能、良好的机械强度以及抗温度波动能力。内部装有线圈状的高温加热丝，以确保良好的散热效果并延长加热器的使用寿命。
接线头下方的非加热区长度可根据需求定制，最小长度为 50 毫米；我们也可根据您的具体要求延长该非加热区。
该加热器支持各种额定电压，最高可达 500 V，并可配置为单相、双相或三相连接。
可以根据具体需求提供多种金属材质及各种安装方式。浸入式套管的表面功率密度也可根据应用场景进行定制。这种个性化定制设计不仅能确保系统运行稳定可靠、延长使用寿命，还能避免对被加热液体造成损害。
CALOR cartridge heaters are especially suitable for direct heating of cleaning solutions and alkalines.
Cartridge Heater Specifications
The cartridge heaters consist of ceramic groove bodies with high electrical insulation values, good mechanical strength and excellent temperature fluctuation resis tance. A high temperature heating wire is fitted as a coil in order to ensure good heat radiation and a long life span of the cartridge.
The unheated zone below the connection head can be designed individually and is at least 50 mm. However, we can also extend this unheated zone according to your wishes.
The cartridges are available in every rated power voltage up to a maximum of 500 V. The connection can be one, two or three phase.
Immersion Tube Material Specifications
We can offer you different metallic materials with the most varied fixing methods according to your requirements or demands. The surface power density of the immersion tube can be custo mized to suit your application. This individual custom design guarantees you the faultless operation of your system, a long life span and prevents damage to the heated liquid.
MAZURCZAK加热器ROTKAPPE系列介绍
ROTKAPPE 角形浸入式加热器是针对液位较低或液位波动较大的各类容器进行直接加热的理想方案。水平布置的加热管段负责从容器底部加热液体，从而确保了最佳的热辐射效果和均匀的热量分布。
额定功率取决于水平加热管段的长度。由于整段管长均可用于加热，因此能够实现较高的加热功率。垂直的非加热管段可根据容器深度进行定制调整。
几乎可以根据客户的具体要求，针对各种容器尺寸进行定制设计。紧凑的结构设计节省了空间，从而有助于实现更具成本效益的规划布局。
通过调整额定功率和加热管长度，可以轻松适应工艺液体所允许的最大表面功率密度要求。
ROTKAPPE 角形浸入式加热器由水平加热管段、长寿命加热芯、垂直非加热管段、接线盒及电源线组成。
浸入式加热管
水平管段与垂直管段焊接为一体。采用多种金属材质制造的加热管确保了优异的耐化学腐蚀性能。高品质材料的使用保证了产品的高可靠性与长使用寿命，从而确保系统正常运行。水平加热管段上焊有角形支架，以确保加热器与容器底部或固定点之间保持必要的最小间距。
长寿命加热芯
长寿命加热芯采用具有高电气绝缘性能和良好机械强度的开槽陶瓷体制造。耐高温加热丝以线圈形式缠绕其中，以实现从加热管向液体的最佳热辐射效果。适用于角形浸入式加热器的加热芯提供多种额定电压规格（最高可达 500 V），支持单相、两相及三相连接。加热芯不可由用户自行更换。
ROTKAPPE angular immersion heaters are the ideal method of direct heating for all containers with a low liquid level or high level fluctuation. The heating of the liquid from the container bottom is achieved by the horizontal heated immersion tube and this ensures optimum heat radiation as well as good heat distribution.
The rated power is determined by the length of the horizontal immersion tube. A relatively high heating performance is also possible because the entire tube length can be used for heating. The vertical, unheated immersion tube section can be adapted to the container depth.
Nearly every desired adaptation to the container size can be realized according to specific customer requirements. The compact type of construction saves space and as a result you can plan more cost effectively.
An adaptation to the maximum permissible surface power density of the process liquid can be easily done by variation of the rated power and the immersion tube length.
ROTKAPPE angular immersion heaters consist of the heated horizontal immersion tube, the long-life heating cartridge, the unheated vertical immersion tube, the terminal casing and the lead.
The Immersion Heater Tube
The horizontal and the vertical immersion tubes are welded toge ther. Good chemical resistance is ensured by using the various metal immersion tube materials. A long lifespan with optimum reliability is assured by using high quality materials, thereby ensuring faultless operation of your system. Angle shaped supports are welded onto the horizontal immersion tube in order to observe the mini mum distance to the container bottom or fixing.
The Long-life Heating Cartridge
Long-life heating cartridges are made from ceramic groove bodies with high electrical insulation values and good mechanical strength. A high temperature resistance heating wire is fitted as a coil in order to achieve the best possible heat radiation from tube to liquid. The cartridges for angular immersion heaters are available in rated voltages up to a maximum of 500 volts for one, two and three phase connections. The cartridges cannot be replaced by the user.
MAZURCZAK产品常用型号：
MAZURCZAK TF02-60BC-F
MAZURCZAK A043388
MAZURCZAK A043638
MAZURCZAK B-FC 800/1,6-400 Ds
MAZURCZAK B-KB 1000/3,5-400 DS
MAZURCZAK B-KB 2000/5,0-400Ds
MAZURCZAK B-KB 800/2.5-400 DS
MAZURCZAK B-KB1000/3.5-400 Ds
MAZURCZAK B-KB1250/4.0-400 Ds
MAZURCZAK B-KB800/1.6-400DS
MAZURCZAK B-KB800/1.6-400DS/FFA
MAZURCZAK B-PS 630/1,25-230WS
MAZURCZAK B-PS-630/1.6 400DS
MAZURCZAK B-Ti 800/2,0-400 Ds
MAZURCZAK B-WKB 635-750/3,15-400DS K2/9
MAZURCZAK B-WKB 635-7503,15-400DS K29
MAZURCZAK B-WKB 650-1000/4,5-380Ds/9
MAZURCZAK B-WKB 650-1000/4.5-380DS/9ART
MAZURCZAK B-WKB 750-1150/4.5-380DS/9ART
MAZURCZAK B-WKB 800-750/3,0-400Ds
MAZURCZAK B-WKB-750-750/3,0-400Ds/BK
MAZURCZAK B-WKB635-750/3.15-400DS K2/9
MAZURCZAK BWKB 900-1250/5,0-400 DS
MAZURCZAK DSW3/1
MAZURCZAK GALMATHERM P40 17905JF19A1
MAZURCZAK IVS3/16-20-70/LC-T
MAZURCZAK L-TG 400/0
MAZURCZAK MTSu 53 (BC-L-L-3) L21
MAZURCZAK NS 3/10 13-30 BC-K
MAZURCZAK NS3/10-20-70/LC-B
MAZURCZAK NS3/10-20-70/LC-T
MAZURCZAK NS33/10-20-70/LC-K
MAZURCZAK NS4/10-13-20-70/LC-K
MAZURCZAK NS4/10-15-30-50/LC-B
MAZURCZAK NS4/10-20-30-70/LC-K
MAZURCZAK NS4/10-20-30-70/LC-В
MAZURCZAK NS4/10-30-50-60/LC-B
MAZURCZAK NT 2/20-30/30/LC-K
MAZURCZAK NT 3/10-12-30/25/BC-K
MAZURCZAK NT2/20-30/25/LC-K/L Temp
MAZURCZAK NT2/20-30/30/lc-k
MAZURCZAK NT3/15-15,5-30/25/LC-B/L
MAZURCZAK P 30 05202 KF 22 R/9
MAZURCZAK P 40 10605 KF 22 R/9
MAZURCZAK P 40 13135 KF 24R/9
MAZURCZAK P 40 15905 JF 22 M1
MAZURCZAK P3012455
MAZURCZAK P40 17905 JF 19 A1
MAZURCZAK PHK 40-1400/100-5,0/400 Ds K1-B/9
MAZURCZAK PHK 40-700/100-2,5/400 Ds K1-B/9
MAZURCZAK PHK 40-900/100-3,5/400 Ds S1-B/9
MAZURCZAK PHK 40-900/100-3,5/400 Ds-K1-B9
MAZURCZAK PHK46-1000/100-5.0/400
MAZURCZAK PHK46-700/100
MAZURCZAK PHK46-700100-3.5380Ds K2-BC9
MAZURCZAK PHK46-800/100-4.0/400DS K1-BC/9
MAZURCZAK PHK46-800/100-4.0/400DS K1-BK/9
MAZURCZAK PHP 46-1400/100/5.0-400 DSK 1-B/9
MAZURCZAK PVDFMTSu45/PG-L/9 51008441
MAZURCZAK PVDFMTSu60/PG-L/9 51008195
MAZURCZAK ROTKAPPE B-KB 1000/3,5-400 DS
MAZURCZAK ROTKAPPE B-WKB 650-10004,5-380Ds9
MAZURCZAK SK25/04179-00
MAZURCZAK TF 29-30/ BC-G
MAZURCZAK TF01-160/SOG-M
MAZURCZAK TF02-30/BC-F
MAZURCZAK TF02-30BC-F
MAZURCZAK TF02-40/LC-B
MAZURCZAK TF02-60/BC-F
MAZURCZAK TR-TF 50/LCG
MAZURCZAK TR-TF50/LC-G
如果您需要完整的MAZURCZAK的相关技术咨询，请随时致电爱泽工业，或者访问网站,我们将尽全力解决您的问题。
If you have any question for MAZURCZAK，Please feel free to communicate with us and we will do our best to solve your problem.
