如下为我司爱泽工业IZE_Industries本月到货KUHNKE相关产品，欢迎致电索取样本资料和产品信息。
KUHNKE电磁阀64.009 KUHNKE电磁阀65.111
KUHNKE旋转电磁阀D29-LOL-F-DS9420 KUHNKE旋转电磁阀D53-ROL-N
KUHNKE线性电磁阀RM50-F KUHNKE线性电磁阀RM32-R-F
KUHNKE电磁阀76.083.98.00 KUHNKE压力开关60.073.80.60
KUHNKE电磁阀64系列介绍
Kuhnke 64系列气动电磁阀采用实心黄铜制造，尽管体积小巧，却极其坚固耐用。
该系列提供三种安装方式：管路式（in-line）、直连式（direct）和集成块式（manifold）。
管路式阀体侧面设有M5接口，底部配有M3螺纹孔，用于将阀体固定在平面上。
直连式阀体侧面设有M5接口，并配有G1/8外螺纹接头，可直接安装在阀门、气缸或其他设备上。
集成块式阀门既可安装在现成的模块化集成块上，也可根据钻孔方案直接定制安装在设备上。
电压规格包括：12V和24V直流（DC），以及24V、110V和230V交流（AC）。标准线圈功率为DC 4.6W和AC 5.5VA，另提供低功耗线圈选项（DC 1.8W）。
Kuhnke 64 series pneumatic solenoid valves are manufactured using solid brass, and although they are small, they are incredibly robust and durable.
There are three mounting options to choose from; these are in-line, direct, or a manifold mount option.
In-line types are M5 side ported, and M3 threaded on the underside for securing the valve to a flat surface.
Direct mounting types are M5 body ported with a G1/8 male threaded stem designed to fit directly to valves, cylinders or other devices.
Manifold valves are either mounted to an off-the-shelf modular manifold or can be custom attached directly to equipment using a drilling plan.
Voltages are 12, 24V DC: 24, 110 and 230V AC. Standard coil power is DC: 4.6 W and AC: 5.5 VA, low coil power options are DC: 1.8 W.
KUHNKE电磁阀65系列介绍
Kuhnke 65系列气动电磁阀采用实心黄铜制造，尽管体积小巧，却极其坚固耐用。
该系列提供三种安装方式：管路式（in-line）、直装式（direct mount）和集成块式（manifold mount）。
管路式阀门采用M5侧向接口，底部设有M3螺纹孔，用于将阀门固定在平面上。
直装式阀门采用M5阀体接口，并配有G1/8外螺纹接头，可直接安装在阀门、气缸或其他设备上。
集成块式阀门既可安装在现成的模块化集成块上，也可根据钻孔方案直接定制安装在设备上。
电压规格包括：12V和24V直流电（DC），以及24V、110V和230V交流电（AC）。标准线圈功率为DC 4.5W和AC 5VA，另提供DC 1.5W的低功耗选项。
请注意，线圈宽度已从20mm增加至22mm。若要将新阀门安装在现有集成块上，可能需要更换集成块，以适应新阀门增加的线圈宽度。
Kuhnke 65 series pneumatic solenoid valves are manufactured using solid brass, and although they are small, they are incredibly robust and durable.
There are three mounting options to choose from; these are in-line, direct, or a manifold mount option.
In-line types are M5 side ported, and M3 threaded on the underside for securing the valve to a flat surface.
Direct mounting types are M5 body ported with a G1/8 male threaded stem designed to fit directly to valves, cylinders or other devices.
Manifold valves are either mounted to an off-the-shelf modular manifold or can be custom attached directly to equipment using a drilling plan.
Voltages are 12, 24V DC: 24, 110 and 230V AC. Standard coil power is DC: 4.5 W and AC: 5 VA, low coil power options are DC: 1.5 W.
It is important to note that the coil width has increased from 20mm to 22mm. If the new valves fit on an existing manifold, the manifold may need replacing to accommodate the increased coil width of the new valves.
KUHNKE旋转电磁阀D系列介绍
旋转电磁阀在通电时，可沿顺时针或逆时针方向进行单向快速旋转运动，并精确到达预设的角度位置。
D系列旋转电磁阀在轴的两端均配备滚珠轴承，且轴体无线性位移，从而确保了精确定位、长使用寿命及免维护运行，以低成本实现高性能。
该系列产品支持25°、35°、45°、65°及95°的旋转角度，提供顺时针或逆时针旋转、单轴或双轴输出设计，以及多种复位弹簧配置（或无弹簧选项），可实现高度定制化。
D系列电磁阀的两侧均设有螺纹安装孔，便于将其固定在平面上。
标准电压为24V DC，额定负载率为100% ED，连接方式可选引线或插头；此外，也可根据需求提供其他电压、弹簧复位选项以及旨在提高扭矩的替代负载率规格。
Rotary solenoids provide unidirectional fast pivotal movement, clockwise or anti-clockwise, to a predefined angular position when energised.
D series rotary solenoids feature ball bearings on both sides of the shaft, with no linear shaft movement to ensure precise positioning for long service life and maintenance-free operation, providing superior performance at a low cost.
Set rotary movements of 25°, 35°, 45°, 65° and 95°, clockwise or anti-clockwise rotation, single or double output shaft design with a choice of return spring position, or without a return spring, enable total customisation of the product.
D series solenoids are provided with threaded holes on either side of the solenoid to secure the device to a flat surface.
Standard voltages are 24V DC, 100%ED rated with flying leads or a plug connection; other voltages, spring return options and alternative duty cycles for increased torque are available on request.
KUHNKE线性电磁阀RM系列介绍
与开放式框架设计相比，采用全封闭线圈结构的圆柱形直线电磁阀能产生更大的作用力，且其封装式线圈结构提供了高防护性能。
封装式电磁阀适用于高功率应用场景。其线圈受到妥善保护，能够适应恶劣或暴露的工作环境；在这些环境中，其他类型的电磁阀设计可能会因受损而导致最终失效。
RM20、RM26 和 RM32 型电磁阀配备双螺纹轴，通电时可沿单一方向产生推力或拉力；断电后，内部弹簧会将轴复位至初始位置。该轴不可拆卸。
RM040 至 RM100 型电磁阀提供两种配置：双向轴（可提供推力或拉力）或单向轴（仅用于推力应用）。其电磁阀轴可从外壳中拆出，以便进行检查或辅助安装。
若要将柱塞（轴）复位至初始位置，需采用机械方式（例如外部安装弹簧、利用重力或借助自动化工艺流程）。
RM 系列电磁阀采用前端安装方式。RM20 和 RM26 型电磁阀配有带螺纹的前端安装部；RM32 及 RM040 至 RM100 型电磁阀则在两端设有螺纹孔，以便将其固定在安装面上。
标准电压为 24V DC，额定负载率为 100% ED，连接方式可选引线或插头；如需其他电压或旨在增大作用力的不同负载率规格，可按需定制。
Cylindrical linear solenoids with a fully enclosed coil produce significantly more force than open-frame designs and provide maximum protection because of their encapsulated coil construction.
Encapsulated solenoids are useful for high-power applications. The coil is protected and suited to arduous or exposed conditions where other solenoid designs would otherwise deteriorate, ultimately leading to failure.
RM20, RM26 and RM32 solenoids come with a double-threaded shaft providing a push or pull force in one direction when energised. An internal spring returns the shaft to its resting position when de-energised. The shaft is not removable.
RM040 to RM100 solenoids come with either a double shaft offering a push force, a pull force, or a single shaft for push-only applications. The solenoid shaft can be removed entirely from the casing for inspection or to assist in mounting the device.
A mechanical solution to return the shaft, for example, an externally mounted spring, gravity, or part of the automated process, is required to return the plunger to a home position.
RM series solenoids are nose-mounted. RM20 and RM26 solenoids come with a threaded nose, and RM32, RM040, to RM100 solenoids are provided with threaded holes at either end of the solenoid to secure the device to a surface.
Standard voltages are 24V DC, 100% ED rated with flying leads or a plug connection; other voltages or alternative duty cycles for increased force are available upon request.
KUHNKE电磁阀76系列介绍
ISO 1 阀门用于控制气动系统中的压缩空气，从而向气缸、其他阀门及设备发送信号；该类阀门依据欧洲规范设计，统一了安装孔位、气流要求及阀体尺寸标准。
ISO 1 阀门提供五通（5-way）功能，支持气控或电控（通过电磁线圈驱动）方式；电磁线圈的安装方向可与主阀体呈直列式或垂直式。
可选电压包括 12V DC、24V/48V/110V AC/DC 以及 230V AC。线圈套入黄铜阀芯杆后，通过螺纹盖固定，并可连接接线插头。
结构形式可选座阀（poppet）或滑阀（spool）。
座阀采用 O 型圈、垫片及密封件，其设计旨在提供比滑阀更高的流量。
滑阀采用不锈钢阀芯与塑料衬套制造；尽管其流量低于座阀，但以使用寿命长而著称。
ISO 1 valves control compressed air within pneumatic systems to signal cylinders, valves, and other devices, designed to European specifications, standardising mounting holes, airflow requirements and valve body dimensions.
ISO 1 valves are available as a 5-way valve function; they can be pneumatically or electrically controlled by solenoid coils that can be in-line or vertical to the main valve body.
Voltages are 12V DC, 24, 48, 110V AC/DC or 230V AC. Coils slide onto a brass stem; a threaded cap secures the solenoid coil, and a wiring plug can be connected.
Choose between a poppet or spool design.
Poppet valves use O-rings, gaskets and seals designed to offer higher flow rates than spool valves.
Spool valves are manufactured using a stainless steel spool and plastic liner, and although spool valves have lower flow rates than poppet-type designs, they are better known for their long life expectancy.
KUHNKE压力开关60系列介绍
气动压力开关专为检测气动系统中的气压变化而设计。
它们通常被称为 PE 转换器或 PE 开关。气动压力开关用于监测应用，以感测气压的变化。它们将这些气压变化转换为电信号，进而向其他设备发送信号。
不可调节的微型压力开关适用于电池供电的计时器或计数器，为各种计时或计数应用提供了一种简单且低成本的解决方案。典型应用场景包括定期更换过滤器，以及气动工具和隔膜泵的维护保养。
可调节压力开关配有转换触点，当达到设定压力时，触点会接通或断开电路；可选的设定范围为 0.5 至 4 bar 或 3 至 8 bar。
Pneumatic pressure switches are designed to detect changes in air pressure in pneumatic systems.
They are often referred to as PE converters or PE switches. Pneumatic pressure switches are used in monitoring applications to sense changes in air pressure. They convert these changes in air pressure into electrical signals, which are then used to signal other devices.
The non-adjustable miniature pressure switch is suitable for battery-operated timers or counters. It provides a simple, low-cost solution for a range of timing or counting applications. Typical examples include regular filter changing, servicing of air tools and diaphragm pumps.
Adjustable pressure switches include changeover contacts that make or break a circuit when the set pressure is reached; available setting ranges are 0.5 to 4 bar or 3 to 8 bar.
KUHNKE产品常用型号：
KUHNKE 60.073.40.01
KUHNKE 60.073.80.01
KUHNKE 60.073.80.60
KUHNKE 60.060.01
KUHNKE 64.009
KUHNKE 64.008
KUHNKE 64.056
KUHNKE 64.055
KUHNKE 64.025
KUHNKE 64.024
KUHNKE 64.073
KUHNKE 64.072
KUHNKE 64.017
KUHNKE 64.016
KUHNKE 64.065
KUHNKE 64.066
KUHNKE 64.001
KUHNKE 64.002
KUHNKE 64.053
KUHNKE 64.011
KUHNKE 64.015
KUHNKE 64.014
KUHNKE 65.113
KUHNKE 65.114
KUHNKE 65.233
KUHNKE 65.234
KUHNKE 65.111
KUHNKE 65.112
KUHNKE 65.171
KUHNKE 65.172
KUHNKE 65.231
KUHNKE 65.232
KUHNKE 65.261
KUHNKE 65.119
KUHNKE 65.12
KUHNKE 65.175
KUHNKE 65.176
KUHNKE 65.127
KUHNKE 65.128
KUHNKE 65.173
KUHNKE 65.174
KUHNKE 65.235
KUHNKE 65.236
KUHNKE 65.271
KUHNKE 76.087.71.41
KUHNKE 76.083.71.41
KUHNKE 76.087.71.42
KUHNKE 76.083.71.42
KUHNKE 76.087.71.47
KUHNKE 76.083.71.47
KUHNKE 76.084.71.28
KUHNKE 76.084.71.38
KUHNKE 76.087.91.00
KUHNKE 76.083.91.00
KUHNKE 76.087.92.00
KUHNKE 76.083.92.00
KUHNKE 76.087.97.00
KUHNKE 76.083.97.00
KUHNKE 76.087.98.00
KUHNKE 76.083.98.00
KUHNKE D94-BOL-N 24V=100%ED
KUHNKE D53-ROL-N-24VDC 100%ED
KUHNKE D53-LOR-N-24VDC 100% ED
KUHNKE D29-LOL-F-DS9420 24VDC 100%ED
KUHNKE RM20-R-F-24VDC 100%ED
KUHNKE RM26-R-F24VDC 100%ED
KUHNKE RM32-R-F24VDC 100%ED
KUHNKE RM040-W-OROR-N-24VDC 100%ED
KUHNKE RM050-W-OROR-N-24VDC 100%ED
KUHNKE RM060-W-OROR-N-24VDC 100%ED
KUHNKE RM070-W-OROR-N-24VDC 100%ED
KUHNKE RM080-W-OROR-N-24VDC 100%ED
KUHNKE RM090-W-OROR-N-24VDC 100%ED
KUHNKE RM100-W-OROR-N-24VDC 100%ED
如果您需要完整的KUHNKE的相关技术咨询，请随时致电爱泽工业，或者访问网站,我们将尽全力解决您的问题。
If you have any question for KUHNKE，Please feel free to communicate with us and we will do our best to solve your problem.
